Influence of the Surface Roughness of PEEK GRF30 and Ti6Al4V SLM on the Viability of Primary Human Osteoblasts Determined by the MTT Test

Piotr Prochor , Żaneta Anna Mierzejewska

Abstract

The aim of the study was to clearly determine whether selected modern medical materials and three dimensional printing allow for satisfactory viability of human osteoblasts, which is important from the point of view of the subsequent osseointegration process. Moreover, as implants are produced with various topography, the influence of surface roughness on viability of bone cells was evaluated. To conduct the research, primary human osteoblasts (PromoCell) were used. Cells were seeded on samples of glass-reinforced polyetheretherketone (30% of the filling), Ti6Al4V manufactured with the use of selective laser melting technology and forged Ti6Al4V with appropriately prepared variable surface roughness. To assess the viability of the tested cells the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide was used. Results showed that all evaluated materials do not exhibit cytotoxic properties. Moreover, on their basis it can be concluded that there is a certain surface topography (designated i.a. as roughness equal to approx. Ra = 0.30 μm), which ensures the highest possible viability of human osteoblasts. On the basis of the received data, it can also be concluded that modern glass-reinforced polyetheretherketone or Ti6Al4V produced by rapid prototyping method allow to manufacture implants that should be effectively used in clinical conditions.
Autor Piotr Prochor (WM/IIB)
Piotr Prochor
- Katedra Biocybernetyki i Inżynierii Biomedycznej
, Żaneta Anna Mierzejewska (WM/IIB)
Żaneta Anna Mierzejewska
- Katedra Biocybernetyki i Inżynierii Biomedycznej
Tytuł czasopisma/seriiMaterials, ISSN 1996-1944, (N/A 140 pkt)
Rok wydania2019
Tom12
Nr24
Paginacja1-14
Objętość publikacji w arkuszach wydawniczych0,65
Słowa kluczowe w języku angielskimbiomedical material; cytotoxicity; osteoblasts; sinister laser melting; surface roughness
Klasyfikacja ASJC General Materials Science2500
DOIDOI:10.3390/ma12244189
URL https://www.mdpi.com/1996-1944/12/24/4189
Identyfikator wewnętrznyROC 19-20
Języken angielski
LicencjaUznanie Autorstwa (CC-BY)
Punktacja (całkowita)140
Żródło punktacjijournalList
PunktacjaPunktacja MNiSW = 140.0, 12-02-2020, ArticleFromJournal
Wskaźniki publikacji Scopus SNIP (Source Normalised Impact per Paper): 2017 = 1,285; Impact Factor WoS: 2018 = 2,972 (2) - 2018=3.532 (5)
Liczba cytowań*
Cytuj
przetwarzanie
Udostępnij Udostępnij

Pobierz odnośnik do tego rekordu


* Podana liczba cytowań wynika z analizy informacji dostępnych w Internecie i jest zbliżona do wartości obliczanej przy pomocy systemu Publish or Perish.
Powrót
Potwierdzenie
Czy jesteś pewien?